Intelligent Lifting Devices

Intelligent Lifting Devices

    Gorbel G-Force
  • Capacities of 165 Lbs, 330 Lbs & 660 Lbs
  • Lift speeds as high as 200 FPM; low speeds less than 1 FPM
    • Up to 4 times faster than traditional high-end lifting devices
      currently on the market
  • Infinite Speed Control: The load moves in sync with the operator’s hand movements
  • Capacity Overload: will not lift if load exceeds the rated capacity
  • Programmable upper and lower limits
  • Float Mode Option: with only a 1/2 Lb of force, the operator can precisely orient loads throughout the full stroke range by manipulating the load with their hands
  • Easily Integrated with Tooling
    Gorbel Easy Arm
  • Capacities of 165 Lbs and 330 Lbs
  • Lift speeds as high as 180 FPM; low speeds less than 1 FPM
  • Infinite Speed Control: The load moves in sync with the operator’s hand movements
  • Capacity Overload: will not lift if load exceeds the rated capacity
  • Operator Present Function: the handle grip uses a built-in photo sensor that doesn’t allow the unit to move unless the operator initiates the movement
  • Float Mode Option: with only a 1/2 Lb of force, the operator can precisely orient loads throughout the full stroke range by manipulating the load with their hands
  • Easy Installation: unit ships assembled and ready to be installed
  • Free-Standing vs. Under-Hung
    • Free-Standing: Choose for easy relocation, no foundation necessary
    • Under-Hung: Choose for hook heights over 11 FT & covering
      multiple workcells















Ergonomic Lift Devices



    LodeArm
  • Capacities up to 225 Lbs
  • Vertical travel up to 54 In
  • Reach up to 113 In
  • 360 Degrees of continuous rotation
  • Ability to rotate loads
  • Pneumatic control
  • Pilot-operated lock valve on lift and grip cylinders prevents vertical arm  movement and loss of load due to power outage
  • Gripper Safety Circuitry senses the pressure in the cylinder and does not allow the part to be released from tooling unless it is supported
  • 5:1 safety design factor for all mechanical components
  • Easily accommodates tooling

 

    Vertical Lift Cylinder
  • Capacities up to 6,000 Lbs
  • Lift lengths to customer specifications
  • 360 Degrees of continuous rotation
  • Ability to rotate loads
  • Hydraulic and Pneumatic control options
  • Pilot-operated lock valve on lift and grip cylinders prevents vertical arm movement and loss of load due to power outage
  • Gripper Safety Circuitry senses the pressure in the cylinder and does not allow the part to be released from tooling unless it is supported
  • 5:1 safety design factor for all mechanical components
  • Easily accommodates tooling

 

    Jumbo Lifter
  • Capacities up to 600 Lbs
  • Vertical travel up to almost 7 Ft
  • Reach up to 113 In
  • For use with bags or any solid objects
  • Multiple handle actuator configurations available
  • Many pad configurations available
  • In the event of power outage, the load will slowly lower to the ground or work surface. Loads will not release while in the air.
  • For installation simply plug in blower to 115 V outlet
    • Blower creates the vacuum suction
  • Indoor or Outdoor use

 

    Vacuum Gripper
  • Many configurations and sizes available
  • For use with most any shaped objects
  • Multiple handle actuator configurations available
  • Many pad configurations available
  • In the event of power outage, the load will slowly lower to the ground or work surface. Loads will not release while in the air.
  • For installation simply plug in blower to 115 V outlet
  • Blower creates the vacuum suction
  • Indoor or Outdoor use

 

    VacuMaster
  • Capacities up to 4 Tons
  • Uses shop air and electric to lift, tilt & reposition heavy loads
  • Versatile uses:
    • Glass
    • Metal
    • Granite
    • Wood
    • Boxes
    • ...and many more
  • Custom configurations available
  • In the event of power outage, the load will slowly lower to the ground or work surface. Loads will not release while in the air.
  • Can also be used with automation or robots









DCM-Pro Manulift
  • Capacities 275 Lbs and 550 Lbs
  • Controls are mounted on top of the hook block
  • Allows operator to manipulate loads with just one hand
  • Note: Hoists are custom built to match the span between the crane girders.
  • 2 Speed Motors Standard: 32/8, 48/12, 64/16 FPM
  • Variable lift speeds available up to 100 FPM
  • 9 and 14 Ft of chain lift
  • Easily accommodates tooling

Digichain
  • Capacities 250, 500 and 1,000 Lbs
  • Controls are mounted on top of the hook block
  • Allows operator to manipulate loads with just one hand
  • Lift Speeds:
    • Single Speed 8, 16, 32 FPM
    • 2 Speed 16/4, 32/8, 64/16 FPM
    • Variable Speed available up to 64 FPM
  • 10, 15 and 20 Ft of chain lift (Standard)

Air Balancers
  • Capacities 120 Lbs to 600 Lbs
  • Up to 8 In of float
  • Limitless start/stop cycles
  • Standard Pendant drop 9 Ft-6 In

 



Follow BohnertInc on Twitter
 


Manufacturers