Intelligent Lift Cranes

Intelligent & Ergonomic Cranes





    Gorbel Easy Arm
  • Capacities of 165 Lbs and 330 Lbs
  • Lift speeds as high as 180 FPM; low speeds less than 1 FPM
  • Infinite Speed Control: The load moves in sync with the operator’s hand movements
  • Capacity Overload: will not lift if load exceeds the rated capacity
  • Operator Present Function: the handle grip uses a built-in photo sensor that doesn’t allow the unit to move unless the operator initiates the movement
  • Float Mode Option: with only a 1/2 Lb of force, the operator can precisely orient loads throughout the full stroke range by manipulating the load with their hands
  • Easy Installation: unit ships assembled and ready to be installed
  • Free-Standing vs. Under-Hung
  • Free-Standing: Choose for easy relocation, no foundation necessary
  • Under-Hung: Choose for hook heights over 11 FT & covering multiple workcells
    Gorbel Pivot Pro
  • Capacities up to 150 Lbs
  • Up to 3 times easier to start and stop than a workstation jib crane
  • No festooning necessary
  • Easier movement of loads close to the mast







Free-Standing Intelligent Lift Devices
    Taurus
  • Capacities from 500 Lbs to 2500 Lbs
  • Vertical travel up to 64 In
  • Vertical lift is achieved with a motor-driven hydraulic system
  • Reach up to 136 In
  • 360 Degrees of continuous rotation
  • Ability to rotate or pitch loads
  • Adjustable drag brakes at each vertical axis of rotation
  • Can be converted from floor-mounted to overhead mounted
  • Pilot-operated lock valve on lift and grip cylinders prevents loss of load due to power outage
  • Gripper Safety Circuitry senses the pressure in the cylinder and does not allow the part to be released from tooling unless it is fully supported
  • 5:1 safety design factor for all mechanical components
  • Easily accommodates tooling

 

    World Manipulator
  • Capacities from 200 Lbs to 660 Lbs
  • Vertical travel up to 55 In
  • Reach up to 115 In
  • 360 Degrees of continuous rotation
  • Ability to rotate or pitch loads
  • Adjustable drag brakes on 3 axis
  • Works well in areas of low headroom
  • Pilot-operated lock valve on lift and grip cylinders prevents loss of load due to power outage
  • Gripper Safety Circuitry senses the pressure in the cylinder and does not allow the part to be released from tooling unless it is fully supported
  • 5:1 safety design factor for all mechanical components
  • Easily accommodates tooling

 

    TransferArm
  • Capacities from 300 Lbs and 500 Lbs
  • Vertical travel up to 24 In
  • Reach up to 72 In
  • 360 Degrees of continuous rotation
  • Ability to rotate or pitch loads
  • Adjustable drag brakes on 3 axis
  • Mounting options: free-standing, portable base, overhead fixed or on trolleys
  • Fits into work areas where larger material handling equipment will not fit
  • Hydraulic and Pneumatic controls
  • Pilot-operated lock valve on lift and grip cylinders prevents loss of load due to power outage
  • Gripper Safety Circuitry senses the pressure in the cylinder and does not allow the part to be released from tooling unless it is fully supported
  • 5:1 safety design factor for all mechanical components
  • Easily accommodates tooling

 

    Articulated Jib Boom
  • Capacities from 200 Lbs to 2,000 Lbs
  • Vertical travel up to customer specification
  • Reach distance to customer specification
  • Adjustable drag brakes on all axis
  • 360 Degrees of continuous rotation using optional electric collector rings
  • Works well in areas of low headroom and for maneuvering around obstacles
  • Electric, Pneumatic, Hydraulic controls
  • 5:1 safety design factor for all mechanical components
  • Easily accommodates tooling

 

    SAM
  • Capacities from 180 Lbs to 900 Lbs
  • Vertical travel up to 100 In
  • Vertical lift is achieved with a motor-driven hydraulic system
  • Reach up to 144 In
  • 360 Degrees of continuous rotation
  • Ability to rotate or pitch loads
  • Adjustable drag brakes on 3 axis
  • Mounting options: free-standing, portable base, overhead fixed or on trolleys
  • Works well in areas of low headroom
  • Pneumatic controls
  • Pilot-operated lock valve on lift and grip cylinders prevents loss of load due to power outage
  • Gripper Safety Circuitry senses the pressure in the cylinder and does not allow the part to be released from tooling unless it is fully supported
  • 5:1 safety design factor for all mechanical components
  • Easily accommodates tooling

 

    ReactionArm
  • Capacities from 40 Lbs to 210 Lbs
  • Vertical travel up to 60 In
  • Reach up to 60 In
  • Balance configuration for “zero-gravity” control
  • 360 Degrees of continuous rotation
  • Ability to rotate or pitch loads
  • Vertical axis brakes available
  • Mounting options: free-standing, portable base, overhead fixed or on trolleys
  • Works well in areas of low headroom
  • Pneumatic controls
  • Pilot-operated lock valve on lift and grip cylinders prevents loss of load due to power outage
  • Gripper Safety Circuitry senses the pressure in the cylinder and does not allow the part to be released from tooling unless it is fully supported
  • 5:1 safety design factor for all mechanical components
  • Easily accommodates tooling



Follow BohnertInc on Twitter
 


Manufacturers